Ink Description:
J - 149 series is to deal with treatment and processing of PET film, sheet, adhesive materials such as printing and development since its dry ink solvent can provide excellent adhesion of alcohol, flexibility, high performance, also can meet various aspects of the fine print sticker.
Scope of application:
As one of the printing and processing need not processing base and various aspects of PET labels as membrane switch, signage, name plate etc, also can be used in vacuum plating aluminum products, the water layer also can be used in the locomotive does not require the spraying glazing decals, etc.
Features:
J- 149 series is one of the difficult with PET by printing material, its performance is very excellent adhesion, membrane layer flat, smooth and bright color, hot forming.
Technical parameters:

Test item test conditions the test results
Ink fineness than eight mu m scraper fineness
Dry film burnish ≧ 60o 60o mirror gloss
Drying speed dry 25 degrees Celsius (10-15min or 60 ° c (3-5min
25 ° c x 24Hr action or 60 ° c 15min x
Attach a force of 100/100 1mm x 1mm stripping by 100 lattice 3M tape
Resistance to change is the white oily 500g/cm2 load 6 # 5 white cotton by 100 times
No change of alcohol resistance 500g/cm2 load 95% alcohol may cotton (200 times back and forth
No change of acid resistance of HCl in x 24Hr soak 5%
No change of alkali resistance of soaking NaOH 5% 24Hr x
No change of salt resistant NaCl x 24Hr soak 5%
Water resistant sex without change of water soak 96Hr x
This series has said the basic colors and 30 four-color and a network of metallic effect.
This series of basic color and network four-color heavy metal content with European Union ROHS, Japan ST and ASTM standard F963-07.

Usage:
A. please will ink mix adequately to prevent ink add additive effects of possible separation phenomenon.
B. printing first consideration may be necessary before printing material surface stain removal and dust.
C: please according to actual j conditions of rational selection of this company, slow, three types of some thinners.
D. please according to the actual effect, printing, want to choose appropriate half-tone: 77-150 line/centimeters
E) to achieve fine lines, design, excellent printing effects, words can add the company J - 49-100 temporary coagulation, in order to better prevent printing ink layer diffusion, burr, blurred.

Problems can take:
A. please make ShiYin first before printing, because of differences in plastic types and reach the required quality requirements.
B. when printing caused by bad or after the printing process, please note very poor in May is plastic plasticizer or other additives migration caused by surface, also should consider whether static reason, usable alcohol or white oil to clean.
C. thinners in between 20-30%, totally depends on mesh mesh, environmental conditions and printing ink viscosity to adjust the height.
D. printability, because base corresponding causes dry differences, please click the target confirmed real way to dry and drying time, to ensure the quality of after printing.
E) before and after the series ink, shall be completely sealed containers printing ink and cool ventilated place, avoid contact with fire or high temperatures.
F. the series of products from the production date, shelf-life is more than 1 year term please reconfirm usability.

Add: all the test data of patience for our test conditions, not as the test results that value.